Glass Industry News

DESIGNING WITH CAST AND HEAT-FORMED DECORATIVE GLASS

, glass magazine

HEAT-FORMED DECORATIVE GLASS

Heat-formed glass, sometimes referred to as heat-sculpted glass, is a category of decorative glass in which the pattern or design is incorporated through softening or melting of the glass using high heat. Once the final form is achieved, the glass is cooled. Heat-formed glass is available in various designs and different colors, thicknesses and textures ranging from standard to custom. These products can be used in many interior and exterior applications and are often used in public art installations.

Textured decorative glass diffracts and reflects light. The depth and shape of the textures created change the way light enters the building, allowing daylight into a space while managing glare and direct sunlight.

SAFETY GLAZING

Safety glazing may be required in certain circumstances, such as shower enclosures, interior partitions and doors. In these cases, the decorative glass can be laminated or include a surface-applied safety film tested and certified to safety glazing standards.

SLUMPED GLASS

Slumped or “kiln-formed” glass is produced by placing float glass into a kiln over a mold having the desired shape or pattern and heating to the temperature where the glass softens and “slumps” to the form of the mold. The formed glass is then annealed and can be further processed or fabricated. Each glass panel is produced individually, allowing each piece to be unique or for an artistic pattern to be carried through the entire installation. When specifying slumped glass, be aware that variation can occur in the pattern and thickness of the glass, and deep texture may limit the ability to heat treat the glass.

CAST GLASS

Cast glass is made by either pouring or blowing molten glass into a mold. As the glass goes through a long, slow cooling process, it hardens and takes the shape and texture of the mold. Typical applications for cast glass are glass block, glass tile, lighting and fixtures, sink bowls, architectural accents and public art installations. Cast glass allows for artistic expression in very small batches.

FUSED GLASS

Fused glass is created by melting in a kiln and fusing together two or more types and colors of glass. Not all glass types can be successfully fused. Each type and color of glass has a “coefficient of expansion,” which is the amount and rate at which the glass expands as it is heated and contracts as it cools. To fuse glass, each piece should have a similar coefficient of expansion to avoid cracking during the heating or cooling process. When specifying fused glass in an installation, ensure that the glass can be manufactured in the sizes you require. Fused glass is typically made in smaller sizes than more traditional architectural glass. Sometimes, the opening may need to be divided into sections to accommodate smaller glass lites. Some designs with large variations in thickness may not be able to be heat treated.

BENT/CURVED GLASS

Bent or curved glass is flat glass that has been formed into a curved shape or profile using high heat and a mold or frame. It is used for both functional and decorative purposes and can be heat treated, further fabricated into laminated or insulating glazing units, and may incorporate a variety of other decorative features. Bent glass can be used in applications such as railings and balustrades, windows, furniture, revolving entrances, shower and bath enclosures, display cases, and architectural facades.

There are a few issues to consider when specifying bent or curved glass. Bent glass can be made into many simple or complex shapes; however, all manufacturers will have a minimum and maximum radius that they can produce. Also, due to the heating process, there may be some optical distortion in bent glass, but modern technology has reduced this significantly.

ROLLED CAST GLASS

Also known as patterned, textured or obscure glass, rolled cast glass has been imprinted with a texture or pattern at high temperatures while still in a molten or malleable state. Unlike slumped or kiln-cast glass, patterned glass is made directly from a mix of raw materials rather than already manufactured glass. It is offered in large sheet sizes in various patterns, and can be cut and fabricated. Most patterns are directional, meaning the pattern runs in one direction. When considering sheet size, the direction of the pattern should also be considered. Some patterned glass can be heat-treated or laminated.

CHANNEL GLASS

Channel glass is a structural glass system that creates light-transmitting walls for interior or exterior applications such as curtain walls, storefronts and rain screens. A series of U-shaped cast glass channels is installed into a perimeter frame that allows glass openings to be formed into arcs, serpentine walls, and columns or tower designs. To specify a channel glass system, select the appropriate framing system, select the desired glass texture combination and determine the glass performance requirements such as wind load, thermal and safety requirements.

, © glass magazine

Материал новостей на Сайте - авторское право и принадлежит Компании или третьему лицу, поставщику новостей , и все права сохранены. Любой Пользователь, который получает доступ к такому материалу, может делать это только в целях собственного использования, и использование такого материала - риск для самого Пользователя. Перераспределение или другая коммерческая эксплуатация такого материала новостей явно запрещены. Где такой материал новостей обеспечен третьим лицом, каждый Пользователь соглашается наблюдать и быть связанным определенными условиями использования, относящимися к такому материалу новостей. Мы не представляем или подтверждаем точность, или надежность любой информации содержащейся в любых новостях или внешних веб-сайтах, упомянутых в новостях.

Если содержание или оформление этих станиц нарушает права третьих лиц или положения закона, тогда мы просим о соответствующем уведомлении без необходимых издержек. Я ручаюсь, что по праву вызванное недовольство место в тексте будет незамедлительно удалено, не требуя подключения поверенного лица с Вашей стороны. Однако вызванные Вами расходы без преждевременного установления конакта будут нами в полной мере отклонены и при необходимости мы подадим встречную жалобу касательно нарушения вышеназванных положений.



Info Grid

Glass studies

Updated worldwide glass study 2024

plants.glassglobal.com

Updated hollow glass study 2024

Request more information

Updated float glass study 2024

Request more information

Further glass market studies

Request more information


Updated worldwide glass market study 2024 available now for flat, container glass and tableware

We have updated our international studies on flat glass, container glass and tableware for 2024.

This unique software provides a global overview about glass producers and technical details. Easy to use and clear tables summarize information and data about glass makers such as: Glass types: flat glass, container glass, tableware, production capacities in regions and countries, number of furnaces, furnace types, year of construction, glass types and sub-types, products, project information, special news and downloads.

Further databases supplying demoscopic data and import and export data complete the market survey. Based on these data, prepare individual country profiles with information about local production capacities, local market sizes and expected demand in the future.

Request your offer via plants.glassglobal.com.

Updated container glass study 2024

X

Updated float glass study 2024

X

Further glass studies and reports 2024

X